Odhav, Ahmedabad, Gujarat
GST No. 24AMSPS0582R1Z2
Approx. Rs 3.85 Lakh / PieceGet Latest Price
Product BrochureProduct Details:Types | Drum Heaters |
Shape | Round |
Usage/Application | Industrial |
Material | Mild Steel |
Firing Mode | OIL FIRED |
Type | 3 Pass |
Fuel Type | Diesel |
Voltage | 415 |
Tank Capacity | 800 Litres |
Voltage V | 415 |
Maximum Temperature | 300 |
CONVECTION HEAT EXCHANGER
Convection zone heat exchanger is designed on coil to coil principle comprising 2 coils fabricated out of high heat resistant ERW boiler tubes. It is equipped with special fly ash collecting device. Outer surface of the heat exchanger is covered with insulating panel consisting high grade insulating materials.
RADIANT HEAT EXCHANGER
The coil of rediant heat exchanger conical shape and fabricated out of high heat resistant ERW boiler tube. It is mounted on suitable designed furnace. It is fabricated out or heavy duty material and provided with necessary fuel feeding arrangement. Furnace is constructed with high quality fire bricks and insulation bricks. The bricks wall is designed in such a way it ensures minimum heat loss. The furnace also is equipped with high heat resistant casting.
REFRACTORY CONNECTION (DUCT)
Both radiant and convection heat exchangers are connected by a specially designed refractory duct which allows flue gas pass from radiant to convection exchanger. (Made of insulating bricks, fire crete super and insulite 7 material
INSTRUMENTATION & SAFETY CONTROLS
• Digital electronic indicator cum controller for return temperature for ID fan cut off. Digital electronic indicator cum controller for forward temperature for ID fan cut off.
• Forward high temperature safety controller shut off the unit in case of the forward temperature exceeds maximum recommended temperature.
• Low level controller in expansion cum dearator tank shut off the unit in case of low thermic fluid level in tank.
• Pressure gauge for Inlet pressure measurement.
• Electronic stack temperature controller shuts off the unit in case of abnormally high temp. • Differential pressure switch shut off unit in case of abnormal thermic fluid flow condition.
• Audio visual alarm for abnormal operating conditions. • Pressure gauge for circuit pressure measurement
Additional Information:
Approx. Rs 3.85 Lakh / PieceGet Latest Price
Product BrochureProduct Details:Minimum Order Quantity | 1 Piece |
Fuel Type | Wood Fired |
Power | 4.7 KW |
Industry | Heating Systems |
Voltage | 415 V |
Firing Mode | Manual |
Efficiency | 82% |
Temperature | 250 C |
Material | MS |
I Deal In | New Only |
Capacity | 1 LAC KCAL/HR |
Country of Origin | Made in India |
STRUCTURAL FEATURES
Shree Engineers Air Heaters are highly efficient, economical and compact in sizes with minimum maintenance/ running cost. The Hot Air Generator consists of air heater body, fabricated our of mild steel duly insulated from inside, combustion chamber fabricated out of Mild steel, automatic oil/gas fired burner, centrifugal blower, control panel, electric motor, pulleys and Belt etc. The centrifugal blower is fitted at the bottom or at the top as per customer's requirement depending on the outlet of the hot air. The hot air from the plenum chamber at the top of the unit, is ductd away to the required places. Aflame viewing port with glass is provided on the opposite side of the burner. The dust proof pre-wired powder coated electrical control panel box is fitted On the Air Heater, The assembly/fitting and testing of the Air Heaters are carried our as per International Standards.
AIR BLOWER
Our air heaters are fitted with powerful centrifugal fans to extract maximum heat from the combustion chambers. These fans are directly coupled with the motor to maintain constant speed of the blower. All the bearing are lubricated for life and maintenance free under normal operating conditions. The impeller is specifically designed and balanced To obtain maximum efficiency and noiseless operation.
OIL/GAS BURNER
The imported burner is a horizontal firing pressure atomizing, forced draft with direct electric spark ignitions. The Burner is Installed on the front side of the unit. The oil/gas burner consists of an elecrical motor, directly Coupled Blower, Gas regulation valve, sequence controller, ignition transformer, photocell, nozzles and other accessories. The Burner Are made out of imported components from world class reputed companies like Landis & Gyr (Germany), Cofi/Fida (Italy), Dungs (Germany), Suntec (France), Denmark, Monarch (USA), SIEMENS (Italy) thus ensuring Trouble Free uninterrupted operation.
Additional Information:
Approx. Rs 1.2 Lakh / PieceGet Latest Price
Product BrochureProduct Details:Minimum Order Quantity | 1 Piece |
Capacity | 1000000 Kcal/Hr |
Material | Stainless Steel |
Fuels | Diesel |
Brand | SHREE ENGINEERS |
Heater Material | WATER |
ISI Certified | Yes |
Efficiency | 87% |
Country of Origin | Made in India |
STRUCTURAL FEATURES
Shree Engineers Air Heaters are highly efficient, economical and compact in sizes with minimum maintenance/ running cost. The Hot Air Generator consists of air heater body, fabricated our of mild steel duly insulated from inside, combustion chamber fabricated out of Mild steel, automatic oil/gas fired burner, centrifugal blower, control panel, electric motor, pulleys and Belt etc. The centrifugal blower is fitted at the bottom or at the top as per customer's requirement depending on the outlet of the hot air. The hot air from the plenum chamber at the top of the unit, is ductd away to the required places. Aflame viewing port with glass is provided on the opposite side of the burner. The dust proof pre-wired powder coated electrical control panel box is fitted On the Air Heater, The assembly/fitting and testing of the Air Heaters are carried our as per International Standards.
AIR BLOWER
Our air heaters are fitted with powerful centrifugal fans to extract maximum heat from the combustion chambers. These fans are directly coupled with the motor to maintain constant speed of the blower. All the bearing are lubricated for life and maintenance free under normal operating conditions. The impeller is specifically designed and balanced To obtain maximum efficiency and noiseless operation.
OIL/GAS BURNER
The imported burner is a horizontal firing pressure atomizing, forced draft with direct electric spark ignitions. The Burner is Installed on the front side of the unit. The oil/gas burner consists of an elecrical motor, directly Coupled Blower, Gas regulation valve, sequence controller, ignition transformer, photocell, nozzles and other accessories. The Burner Are made out of imported components from world class reputed companies like Landis & Gyr (Germany), Cofi/Fida (Italy), Dungs (Germany), Suntec (France), Denmark, Monarch (USA), SIEMENS (Italy) thus ensuring Trouble Free uninterrupted operation.
Additional Information:
Explore More Products
© Shree Engineers. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited